By Michael Nielsen, Publisher | 15+ Years in Diesel Repair & Fleet Operations
Last Updated: November 2026
⏱ Estimated reading time: 13 minutes
Truck parts tariffs are a 25 percent Section 232 duty on imported medium- and heavy-duty truck parts listed in the proclamation's Annex I, in effect since November 1, 2025. Parts that qualify under USMCA are exempt for now, so the duty lands mainly on parts from outside North America. For a repair bill, the effect depends on how much imported content sits in the part and whether the supplier passes the duty through.
This Heavy Duty Journal guide explains what truck parts tariffs cover, what the 2026 court and trade changes did and did not alter, what ATRI's cost data shows and how fleets and shops can manage repair costs. As of November 2026, HDJ found no government price series that isolates the tariff effect on heavy-duty parts, so the article separates documented rules from estimates.
Key Takeaways
- 01The duty is 25 percent. Proclamation 10984 taxes imported medium- and heavy-duty vehicles and Annex I parts at 25 percent from November 1, 2025, and buses at 10 percent.
- 02USMCA parts are exempt for now. Qualifying parts owe no duty until Commerce and CBP set up a process that taxes only non-U.S. content.
- 03The Supreme Court ruling did not touch it. The February 20, 2026 IEEPA decision left Section 232 duties in place.
- 04ATRI sees a parts effect. Repair and maintenance cost rose 8.6 percent to 22 cents per mile in 2025, and ATRI believes Section 232 duties helped.
- 05The bill math is not 25 percent. Only the imported, dutiable share of a part's cost rises, and labor is not tariffed.
- 06Planning beats guessing. Ask suppliers for country of origin and USMCA status before quoting repairs.
In This Guide · 12 sections
- What Truck Parts Tariffs Cover
- Truck Parts Tariffs Timeline
- Rates, Exemptions and Offsets
- How the Duty Reaches a Repair Bill
- What ATRI Cost Data Shows
- What the 2026 Rulings Changed
- Steel and Aluminum Duties and Parts
- Which Parts and Shops Feel It Most
- A Fleet Plan for Higher Parts Costs
- What HDJ Could Not Confirm
- Frequently Asked Questions
- The Bottom Line
01
What Truck Parts Tariffs Cover
Truck parts tariffs come from Section 232 of the Trade Expansion Act, which lets the President adjust imports that threaten national security. Proclamation 10984, signed October 17, 2025 and published at 90 FR 48451, imposes a 25 percent ad valorem duty on medium- and heavy-duty vehicles (MHDVs) and on the medium- and heavy-duty vehicle parts (MHDVPs) listed in its Annex I (Federal Register, October 22, 2025).
The proclamation applies to goods entered on or after 12:01 a.m. eastern time on November 1, 2025, and says the duties continue until expressly reduced, modified or terminated (White House proclamation text). Its findings name engines, batteries, transmission shafts, castings and forgings among the parts the domestic industry depends on. HDJ could not read the Annex I list itself, which is published as images, so this guide does not list covered parts by code.
02
Truck Parts Tariffs Timeline
The tariff rules have moved through several steps since the proclamation, and the rate most shops feel has stayed constant. As of November 2026, the 25 percent duty is unchanged. The table lists the dates HDJ confirmed from primary sources and flags the one that is reported only by a legal summary.
| Date | Event | Source |
|---|---|---|
| October 17, 2025 | Proclamation 10984 signed; 90 FR 48451 published October 22 | Federal Register |
| November 1, 2025 | 25% duty on MHDVs and Annex I parts takes effect | Proclamation |
| February 2, 2026 | Importers may submit U.S.-content documentation for USMCA-qualifying MHDVs (91 FR 4504) | Federal Register |
| February 20, 2026 | Supreme Court rules IEEPA does not authorize tariffs; Section 232 unaffected | DLA Piper summary |
| June 8, 2026 | Revised steel, aluminum and copper duty rates take effect | Taft summary of June 1 proclamation |
| July 24, 2026 | Section 301 duties replace the expiring Section 122 surcharge; Section 232 goods exempt | Dorsey summary |
The February 2 notice applies to whole vehicles, not replacement parts. It lets importers document U.S. content so the duty reaches only the non-U.S. portion, and it warns that overstated U.S. content makes the 25 percent duty apply retroactively to November 1, 2025 (Commerce notice, 91 FR 4504).
03
Rates, Exemptions and Offsets
The rate on truck parts is 25 percent, but several rules can reduce or remove it. The proclamation exempts USMCA-qualifying parts "until such time" as the Commerce Secretary, with U.S. Customs and Border Protection (CBP), creates a process that taxes only non-U.S. content. Knock-down kits and equivalent parts compilations stay subject to the duty even when they qualify.
| Item | Rule | Effect on parts |
|---|---|---|
| Duty rate | 25% on MHDVs and Annex I parts; 10% on buses | Imported parts pay on customs value |
| USMCA-qualifying parts | Exempt until a non-U.S.-content process is published | Most North American parts owe no duty today |
| Import adjustment offset | 3.75% of the value of MHDVs assembled in the U.S., Nov 2025 to Oct 2030 | Lets truck makers reduce their own parts duty |
| Engine offset | Equivalent offset for engine makers | Same logic, tied to U.S.-assembled engines |
| Inclusion process | Commerce may add parts to the scope | The list can grow |
| Duration | Until expressly reduced, modified or terminated | No expiry date |
The offset is the proclamation's own math: a 25 percent duty applied to parts that make up 15 percent of a vehicle's value equals 3.75 percent. It benefits truck manufacturers that assemble in the U.S., not independent repair shops, so a shop buying imported replacement parts does not receive it.
04
How the Duty Reaches a Repair Bill
A 25 percent duty does not raise a repair bill by 25 percent. The duty applies to the customs value of the imported part, and only the part of a bill that is an imported, covered part can rise. Labor is not tariffed, and parts that qualify under USMCA or come from U.S. plants owe no Section 232 duty.
The table below is an HDJ illustration, not a measured price index. It shows how the dutiable share of a part's cost limits the increase, assuming the supplier passes the duty through at cost and adds no extra margin on it.
| Dutiable share of part cost | Duty effect on part cost | If the part is 40% of the invoice | If the part is 60% of the invoice |
|---|---|---|---|
| 100% (fully imported, non-USMCA) | +25.0% | +10.0% | +15.0% |
| 60% | +15.0% | +6.0% | +9.0% |
| 30% | +7.5% | +3.0% | +4.5% |
| 0% (USMCA-qualifying or U.S.-made) | 0% | 0% | 0% |
Real prices can move differently. Suppliers may add margin on the duty, buy ahead of increases, or absorb part of it, and HDJ did not find data showing which behavior dominates. The point of the table is the ceiling: for a fully imported part the effect on the whole bill is bounded by that part's share of the invoice.
Track Parts Costs Before They Hit Your Bills
Tariff rules, supplier pricing and maintenance cost trends keep shifting. Get weekly updates from Heavy Duty Journal on the changes that reach fleet repair budgets and shop invoices.
05
What ATRI Cost Data Shows
ATRI's cost data gives the best measured view of repair spending, though it does not isolate tariffs. According to its 2026 analysis of 2025 operations, repair and maintenance (R&M) cost rose 8.6 percent, or 2 cents, to about 22 cents per mile, tires rose 6.4 percent to about 5 cents, and total operating cost reached a record $2.336 per mile (reported by FleetOwner, July 22, 2026).
| Cost item | 2025 per mile | Change from 2024 | Note |
|---|---|---|---|
| Repair and maintenance | 22 cents | +8.6% | Up 45% since 2019 |
| Tires | 5 cents | +6.4% | ATRI links the rise to tariffs |
| Fuel | 48 cents | Not stated | For scale |
| Total operating cost | $2.336 | Record high | ATRI, 2025 data |
22¢
per mile for repair and maintenance in ATRI's 2025 data, up 8.6 percent. Early 2026 carrier data showed R&M up 2.4 percent in the first half, as reported by FleetMaintenance on August 7, 2026.
ATRI said it believes Section 232 duties on steel, aluminum and other materials helped raise repair parts prices, and that replacing the struck-down IEEPA tariffs would worsen the problem, per FleetMaintenance. HDJ treats this as ATRI's assessment, not a measured tariff share, because the cost series covers many drivers of R&M spending.
Key Recommendation
Do not assume a parts price increase equals the 25 percent duty. Ask each supplier for origin and USMCA status, then budget on the dutiable share.
06
What the 2026 Rulings Changed
The 2026 rulings changed other tariffs but did not remove the Section 232 truck duty. In Learning Resources, Inc. v. Trump, decided February 20, 2026, the Supreme Court held that IEEPA does not authorize tariffs, invalidating the "reciprocal" and trafficking duties; law-firm summaries state that Section 232 duties were unaffected. CBP stopped collecting the IEEPA duties on February 24, 2026.
A 10 percent Section 122 surcharge followed for 150 days, and a Dorsey summary reports that USTR finalized Section 301 duties on July 23, 2026, effective July 24, with goods already subject to Section 232 exempt. For a Section 232 truck part, that exemption matters: the Section 232 duty stays the one that applies.
PACCAR's third-quarter 2026 filing shows how the changes read from a manufacturer's side. It says tariff exposure is minimized by producing trucks locally for the U.S., Canada and Mexico, and that IEEPA relief recovered certain amounts paid (PACCAR Form 10-Q, September 30, 2026). It discusses no tariff effect on its parts business.
07
Steel and Aluminum Duties and Parts
Steel and aluminum duties affect parts through a different route than the truck duty. Under a June 1, 2026 proclamation effective June 8, a Taft summary reports base rates of 50 percent on specified steel, aluminum and copper products and 25 percent on certain derivatives, with lower rates for some countries and for products using U.S.-origin metal.
A part cannot easily be taxed under both regimes. The Section 232 truck proclamation says covered products follow the stacking rules of Proclamation 10908, and a trade-law summary by ST&R reports that parts covered by the truck duty are not also subject to the metals duties. HDJ did not verify the stacking text itself, so a shop should confirm classification with its supplier or customs broker.
Metals costs can still reach a repair bill indirectly. Parts made in the U.S. from imported steel or aluminum may carry higher input costs even when the part itself owes no truck duty. This is another reason a price increase on a domestic part is not proof of a tariff error.
08
Which Parts and Shops Feel It Most
Imported, non-USMCA parts feel the duty most, and shops that buy them feel it first. A Commercial Vehicle Solutions Network letter reported by AftermarketNews says imports make up about 43 percent of trucks sold in the U.S. and warns that aftermarket products from Europe, Brazil, India and Asia may rise sharply, with engines, transmissions, electrical systems and cast or forged parts most exposed.
The same letter says remanufacturers of engines, transmissions, axles and brake systems may gain demand as alternatives to new imported parts. HDJ treats both points as industry expectations, not measured results. HDJ's remanufactured diesel parts guide and OEM vs aftermarket parts guide cover quality and cost trade-offs that matter more when new-part prices rise.
Shops should also expect more paperwork. USMCA-qualifying parts are exempt only when the importer documents qualification, so distributors may ask about origin more often. HDJ's global vs local parts sourcing guide covers how to weigh global and local suppliers.
09
A Fleet Plan for Higher Parts Costs
A fleet plan for higher parts costs starts with knowing which parts are exposed. The steps below are HDJ suggestions built on the documented rules, not federal requirements, and they aim to cut surprise more than price.
A practical plan for truck parts tariff exposure
- Ask for origin. Request country of origin and USMCA status on your top 20 parts by spend.
- Separate parts from labor. Track parts cost per work order so a tariff effect is not hidden inside labor changes.
- Quote with a range. Give customers a parts range on big jobs and re-check pricing at order time.
- Compare supply options. Price a remanufactured or domestic equivalent where quality standards are met.
- Set review dates. Revisit supplier pricing quarterly, since rules and suppliers change.
HDJ's strategic sourcing guide and heavy-duty parts supply chain guide explain contracting and stocking approaches, and the fleet total cost of ownership guide puts parts inflation next to downtime and labor. Heavy Duty Journal's cost guides at heavydutyjournal.com, written by Michael Nielsen, cover the neighboring decisions.
10
What HDJ Could Not Confirm
HDJ did not find a government price series that isolates tariff effects on heavy-duty parts. The 2025 ATRI figures are real, but they cover all drivers of R&M cost, and trade-press estimates of parts increases that HDJ checked were not tied to a primary source, so this guide gives none.
HDJ also did not read the Annex I parts list, confirm the exact stacking text with the metals proclamations, or find the date Commerce will publish a USMCA non-U.S.-content process for parts. Each could change which parts owe duty, and a supplier or customs broker should confirm coverage for a specific part number.
Editorial Insight
The HDJ Perspective
According to Heavy Duty Journal, truck parts tariffs are a purchasing-data problem more than a policy problem for most shops. In HDJ's field experience across 15+ years of coverage, the shops that handle price shocks best know their top parts by spend and origin before the shock arrives.
FAQ
Frequently Asked Questions
What are truck parts tariffs?
Truck parts tariffs are a 25 percent Section 232 duty on imported medium- and heavy-duty truck parts listed in Annex I of Proclamation 10984. The duty has applied since November 1, 2025, and it remains in effect until the government reduces, modifies or ends it.
Do truck parts tariffs apply to USMCA parts?
Not today. The proclamation exempts USMCA-qualifying parts until Commerce and CBP set up a process that taxes only non-U.S. content. Knock-down kits and equivalent parts compilations stay subject to the duty even when they qualify under USMCA, so origin documentation matters.
How much do truck parts tariffs raise repair bills?
As of November 2026, HDJ found no measured figure. A 25 percent duty raises the cost of a fully imported part by up to 25 percent, but labor is not tariffed and USMCA or U.S.-made parts owe none, so the bill rises less. See Exhibit 3.
Did the Supreme Court strike down truck parts tariffs?
No. The February 20, 2026 decision held that IEEPA does not authorize tariffs, but law-firm summaries state it did not affect Section 232 duties, which cover autos, metals and trucks. The duty rests on Section 232, so it remained in place after the ruling.
What did ATRI say about tariffs and repair costs?
ATRI said repair and maintenance cost rose 8.6 percent to about 22 cents per mile in 2025 and that it believes Section 232 duties helped raise parts prices. Trade press also reported that ATRI expects higher parts prices if replacement tariffs arrive.
Are steel and aluminum tariffs stacked on truck parts?
HDJ could not confirm the exact text. The truck proclamation follows the stacking rules of Proclamation 10908, and a trade-law summary reports covered truck parts are not also hit by metals duties. Confirm a specific part with your supplier or customs broker.
Can the list of covered truck parts grow?
Yes. The proclamation directs Commerce to set up a process to add parts when inclusion would reduce or eliminate the national security threat, and it may accept requests from domestic producers and other interested parties. HDJ did not find a published list of additions.
Does the 3.75 percent offset help repair shops?
No. The offset is available to manufacturers that assemble medium- and heavy-duty vehicles in the U.S., and engine makers get an equivalent one. It reduces their own parts duty, so an independent shop buying imported replacement parts does not receive it.
How can a fleet reduce the impact of truck parts tariffs?
Ask suppliers for country of origin and USMCA status, track parts cost separately from labor, and price remanufactured or domestic options where quality standards are met. These steps are HDJ suggestions, not requirements, and results depend on each supplier's pricing.
Wrap-up
The Bottom Line
The documented 25 percent duty has a large USMCA exemption, and the 2026 court and trade changes left them in place. ATRI's data shows repair costs rising, but no source HDJ found isolates the tariff share, so fleets should budget on the dutiable share of their parts and not on the headline rate.
Heavy Duty Journal recommends asking suppliers for origin data, tracking parts separately from labor and reviewing pricing on a schedule. Michael Nielsen and the HDJ team publish cost and compliance updates at heavydutyjournal.com, so check back as Commerce adds parts or publishes a USMCA process. A related HDJ guide covers the cost of the parking shortage for fleets.
Share This Guide
Know a shop owner or fleet manager watching parts prices? Share this guide before the next parts order.



